螯合型二甘醇钛酸酯的合成及其催化性能研究

报导了两种新的螯合型二甘醇钛酸酯的合成方法，进行了ＩＲ和ＵＶ鉴定，并作为酯化反应催化剂催化合成了邻苯二甲酸二辛酯。研究了酯化反应转化率与反应时间、反应温度及催化剂用量的关系，探讨了催化剂结构与催化性能的关系。     

Single-photon vacuum-ultraviolet laser-pulsed-field ionization-photoelectron studies of trans- and cis-1-bromopropenes

The vacuum-ultraviolet (VUV) pulsed-field ionization-photoelectron (VUV-PFI-PE) spectra of trans-1-bromopropene (trans-CH(3)CH[Double Bond]CHBr) and cis-1-bromopropene (cis-CH(3)CH[Double Bond]CHBr) have been measured in the energy region of 74 720-76 840 cm(-1). The simulation of fine structures observed in the origin VUV-PFI-PE vibrational bands of these molecules has provided the ionization energies (IEs) of trans-1-bromopropene and cis-1-bromopropene to be 74 779.3+/-2.0 cm(-1) (9.2715+/-0.0002 eV) and 75 140.2+/-2.0 cm(-1) (9.3162+/-0.0002 eV), respectively. The vibrational bands resolved in these VUV-PFI-PE spectra at energies 0-1700 cm(-1) above the IEs of trans-1-bromopropene and cis-1-bromopropene have been assigned based on theoretical vibrational frequencies and calculated Franck-Condon factors for the ionization transitions.     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

A Kinetic Evidence for the Nitroxyl Radicals Recycling Mechanism in the Photostabilizing Process of HALS

The photoinduced bulk polymerization of a reactive-hindered amine fight stabilizers(r-HALS), 4-acryloyl-2, 2, 6, 6-tetramethylpiperidinyl (ATMP), was performed at 80℃ by using a DPC technique. An unique periodic exponential attenuation-type oscillating curve was found when the polymerization was carried out in air, but this phenomenon was not found in nitrogen.It is supposed that this unique kinetic performance may be attributed to nitroxyl radicals that are produced in situ from the oxidation of ATMP. ATMP polymer with narrow polydispersity (d =1.03) can be obtained by photoinduced solution polymerization of ATMP. The signal detected in ESR may be assigned to the nitroxyl radicals in the matrix of ATMP polymer. Since this kind of recycling of nitroxyl radicals is well documented for the photostabilizing mechanism of HALS, the present results may serve as a kinetic evidence for this mechanism.     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.     

两亲性丙烯酸酯共聚物的聚合研究

利用过氧化苯甲酰为引发剂探讨了甲基丙烯酸β－羟乙酯和丙烯酸长链烷基酯的自由基共聚合。重点讨论了合成条件如溶剂、沉淀剂、引发剂用量、单体配比、反应时间等对共聚反应的影响以及各种聚合条件对该共聚物的组成、结构和性能的影响。并用ＩＲ，ＧＰＣ，＾１３ＣＮＭＲ等手段对共聚物进行了表征。     

Highly efficient visible-light photocatalytic ethane oxidation into ethyl hydroperoxide as a radical reservoir

Photocatalytic ethane conversion into value-added chemicals is a great challenge especially under visible light irradiation. The production of ethyl hydroperoxide (CH₃CH₂OOH), which is a promising radical reservoir for regulating the oxidative stress in cells, is even more challenging due to its facile decomposition. Here, we demonstrated a design of a highly efficient visible-light-responsive photocatalyst, Au/WO₃, for ethane oxidation into CH₃CH₂OOH, achieving an impressive yield of 1887 μmol g_cat⁻¹ in two hours under visible light irradiation at room temperature for the first time. Furthermore, thermal energy was introduced into the photocatalytic system to increase the driving force for ethane oxidation, enhancing CH₃CH₂OOH production by six times to 11 233 μmol g_cat⁻¹ at 100 °C and achieving a significant apparent quantum efficiency of 17.9% at 450 nm. In addition, trapping active species and isotope-labeling reactants revealed the reaction pathway. These findings pave the way for scalable ethane conversion into CH₃CH₂OOH as a potential anticancer drug.

Highly efficient visible-light driven photocatalytic oxidation of ethane into ethyl hydroperoxide was realized for the first time over Au/WO₃.     

Crystallization of binary carboxylic acids characterized with streaming potential measurement

The streaming potential of supersaturated solution of binary carboxylic acids, which have even carbon atoms, was determined to characterize crystallization under different temperatures. The value of the streaming potential was related to the type and solubility of the acids and the starting temperature of crystallization, and was easily influenced by the pressure difference of the liquid or the rate of temperature decline. When the temperature was declined to the point where a crystal nucleus appeared, the streaming potential reached the minimum. Thereafter, as the temperature was sequentially lowered, some minicrystals grew, and the streaming potential presented an ascendant tendency. The higher the starting temperature of the acids saturated solution, the higher is the temperature corresponding to the streaming potential minimum. The less the carbon atoms in the acids and the greater the solubility of the acids are, the higher is the temperature of the streaming potential minimum. Copyright © 2007 John Wiley & Sons, Ltd.     

新型手性Salen双核锌配合物的分子识别研究

合成了新型手性Salen配体（H3L）及新型手性Salen双核锌配合物（主体）.通过研究主体对咪唑类客体及氨基酸酯类客体的分子识别行为,测定了这些配位反应的缔合常数.主体对咪唑类客体分子识别的缔合常数顺序为:K(Im) >K(2-MeIm) >K(2-Et-4-MeIm).主体对氨基酸酯类客体分子识别的缔合常数顺序为:K(LeuOCH3) >K(ValOCH3) >K(AlaOCH3) >K(SerOCH3),配位数均为2.主体与D、 L型氨基酸酯分子识别反应在不同温度下的缔合常数结果表明,随着温度的升高,对映选择性下降.实验发现反应体系中存在焓熵补偿关系. CD光谱的研究结果也反映了主体对不同客体识别能力的差异.     

Powering the analytical glow discharge

The glow discharge may be powered by direct current (dc), radio frequency (rf) and pulsed discharge sources. Each has specific advantages and special features that should be considered by analysts using the various forms of glow discharge spectroscopy. This paper reviews some of the factors that contribute to the selection of a power source for the glow discharge.